Loading...
Serving Florence-Graham, CA and surrounding areas. (213) 664-3054
Hot-mix asphalt speed bumps built to last in a warm climate. We shape the right profile for your driveway or parking area, add striping for visibility, and finish the job in a single day.
Speed bump installation in Florence-Graham means laying hot-mix asphalt in a rounded or trapezoidal profile across your driveway or private lane, compacting and shaping it smooth, and adding paint striping - most single-bump residential jobs are finished in a few hours.
Florence-Graham is a densely built community with multi-family buildings, shared driveways, and tight lots where pedestrians and vehicles share the same space. When cars move too fast through those areas, the risk to residents - especially children - is real. A speed bump is the most direct fix because it forces drivers to slow down regardless of signage.
Speed bumps go on private property - driveways, apartment complex lanes, and parking lots. If you also need the surrounding pavement brought back to good condition first, take a look at our parking lot paving and asphalt sealcoating services.
If cars routinely speed through your shared driveway, apartment complex entrance, or private road, a speed bump is the most direct fix. In a dense community like Florence-Graham, where pedestrians and children share tight spaces with vehicles, uncontrolled speed is a concrete safety hazard - not just an inconvenience.
If someone has almost been hit, or a vehicle has struck a parked car or structure in your driveway area, that is a clear signal that a physical traffic-calming measure is needed. A speed bump removes the guesswork - it slows drivers regardless of signs or verbal warnings.
In multi-family properties and HOA communities across the Los Angeles area, speed-related complaints from residents are one of the most common reasons property managers request speed bumps. If you are fielding repeated concerns, a bump is a documented, concrete response.
Some older Florence-Graham properties have rubber or prefabricated bumps that have shifted, cracked, or worn down. If your current bump no longer slows traffic reliably or has become a trip hazard, replacing it with a properly installed asphalt bump is the right move.
We start with a site visit to measure the lane width, check the condition of the existing pavement, and confirm the right bump profile for your situation. If the surrounding asphalt has cracks or soft spots that need attention before the bump goes in, we flag those and can handle the repairs as part of the same job. On installation day, the crew prepares the surface, lays and compacts hot-mix asphalt into the correct profile, and finishes the transitions on both sides so the bump is smooth and gradual - not a jarring obstacle that damages vehicles or creates a trip hazard.
Paint striping - typically yellow or white chevrons - is available as part of the installation so drivers can see the bump clearly, day or night. We also offer asphalt sealcoating as a follow-on service to protect the entire driveway after the bump is installed, and parking lot paving for property managers who need a full surface overhaul at the same time.
For single-family and small multi-family driveways where one or two bumps are enough to control vehicle speed near a garage or pedestrian crossing.
For shared drives and internal lanes in multi-family properties where residents and delivery vehicles need a physical cue to slow down.
For commercial and private parking areas where vehicle speed poses a risk to pedestrians moving between cars and building entrances.
For properties with worn-out rubber or prefabricated bumps that need to be replaced with a durable, properly shaped asphalt bump.
Florence-Graham is a densely populated unincorporated community where small lots, tight driveways, and shared access lanes are the norm. Many properties here include multi-family buildings or apartment complexes - exactly the settings where vehicle speed becomes a daily safety issue. Children playing near a driveway entrance, residents backing out of parking spots, and delivery drivers who do not know the property all share the same narrow lanes. A speed bump is one of the few traffic-calming measures a private property owner can install without waiting for a city or county process.
Southern California's warm climate is also ideal for asphalt longevity - there is no freeze-thaw cycle here to crack pavement from below, so a well-installed bump can last for years without the seasonal damage common in colder regions. Property owners in Huntington Park and Lynwood share the same urban density and climate conditions, and we install speed bumps in those communities as part of our regular service area. If your property also needs fresh sealcoating or new pavement after the bump goes in, we handle that in the same visit.
We will reply within one business day. Tell us where the bump is needed, how wide the lane is, and roughly how many bumps you want. We will ask about the property type and any shared-access considerations that affect the design or any required approvals.
We visit your property to measure the lane width, assess the condition of the existing pavement, and confirm the right bump profile. You receive a written quote covering materials, labor, and any striping - no verbal estimates, no surprises after the job starts.
The crew arrives, prepares the surface with any needed minor repairs, then lays and compacts hot-mix asphalt into the bump profile. Most residential or small-lot jobs are complete in a few hours. Clear the area of vehicles before the crew arrives.
Paint striping is applied once the bump is shaped and compacted. The asphalt needs several hours to cool before vehicles can drive over it - your contractor gives you a specific window based on that day's weather. In Florence-Graham's warm climate, curing is generally faster than in cooler regions.
Free on-site quotes for Florence-Graham speed bump projects. We reply within one business day.
(213) 664-3054A bump that is too steep damages low-clearance vehicles; one that is too gentle does nothing. We discuss profile options before any asphalt is laid, referencing industry standards from NAPA to size the bump correctly for the types of vehicles and speeds typical on your property.
Florence-Graham properties often have limited staging space, parked cars nearby, and neighbors within a few feet of the work zone. We know how to work efficiently in those conditions without disrupting your tenants or making a mess your neighbors have to deal with.
California requires paving contractors to hold a state license - you can verify any contractor through the CSLB online database before signing anything. A licensed contractor carries the required insurance that protects you if something goes wrong on your property during the job.
Florence-Graham's warm climate means there is no winter shutdown to plan around. You can schedule speed bump installation in any month when it is convenient for your tenants or residents - not just when the weather finally cooperates. Most jobs are complete and back in use the next morning.
A properly installed speed bump is a durable, low-maintenance safety improvement. We build them to last in the Southern California climate and stand behind the work with a written warranty on both the bump and the repaved surface.
Seal and protect the driveway surface after a speed bump installation to extend pavement life and improve appearance.
Learn MoreFull parking lot paving for multi-family or commercial properties where speed bumps are part of a larger traffic plan.
Learn MoreWe serve Florence-Graham and the surrounding Los Angeles area year-round - no need to wait for the right season. Call now or get a free estimate online.